Yes! Due to public demand, I have finally completed the code for a selectable stutterbox! Typically, your chip will now include 5 different launch rev limiters: 4500/4750/5000/5250/5500. Like TMO, I use the factory gauge to show you which stutterbox rpm is selected. When you first turn the ignition key on, the boost gauge should point to one of the 5 divisions on the gauge:
-14 (off the bottom of thescale) = 1st selection (4500)
-7 = 2nd selection (4750)
0 = 3rd selection (5000)
+7 = 4th selection (5250)
+14 = 5th selection (5500)
These 5 selections should cover most people's needs, but please feel free to ask if you need something special. I chose 250 rpm steps, instead of 500 rpm, to give you the ability to finetune your launch. Oftentimes, another 500 rpm's is too much, and traction becomes an issue while launching.
To select a different launch rpm, just tap the gas pedal, without the engine running, and the gauge will advance to the next setting. It is NOT necessary to push in the clutch at the same time, as you would do on a TMO.
You can also read TMO's instructions if you need visual instructions.

http://www.dsmchips.com Please address any questions / comments to nathan1047@nathantoddpharr.com

BACK