NEW FEATURE! I now have complete control of all 4 of the DSM solenoid outputs! So, for only $30 more, I can program any one of them to control a NO2 solenoid or relay. How safe is it? Well, of course, I still HIGHLY recommend that you ALWAYS install a MASTER safety switch on the positive voltage supply to the solenoid or relay. But, on top of that, I have the ECU code first test several things, before activating the solenoid:
1) The engine is running
2) The ignition is NOT in the START position
3) The clutch is OUT
4) The TPS is >95%
5) The car is moving
6) The rpm's are in the range you indicate to me
So, as you can see, it would be highly unlikely for the NO2 relay or solenoid to get accidently activated. The ECU will supply a negative (ground) trigger to the solenoid at the designated LOW rpm, and deactivate it again when the HIGH rpm limit is reached.
Please contact me if you need more details. If you want this option, put "NO2 output on XXXX solenoid XXXX LOW, XXXX HIGH" in the comments box of your order. Do NOT proceed to the Paypal section, but Paypal me directly, referencing the order number and adding $30 to the chip price, using keydiver@yahoo.com as my Paypal ID.

http://www.dsmchips.com Please address any questions / comments about NO2 activation to keydiver@yahoo.com

BACK